The ISR Performance PRO V2 suspension arm kit for the 1995 to 1998 Nissan 240SX S14 is a complete rear and front arm package that replaces the four most important adjustable links on the S14 in one purchase. It is aimed at lowered street cars, drift cars and track builds that need more angle, more clearance and real adjustability at the rear.
Arms in the Kit
- Offset PRO front tension rods, which allow for wider wheels and more steering angle clearance
- Angled PRO rear toe control arms for extra clearance, ideal for low cars
- PRO traction rods
- PRO rear upper control arms
Fitment
Nissan 240SX S14, 1995 through 1998 model years.
What Each Arm Does on an S14
The front tension rods locate the lower control arm fore and aft; the offset Pro version pulls the rod out of the wheel's path so a wide front wheel can turn further before contact. The rear toe arms set rear toe, and the angle in the Pro arm clears the subframe bushings on a slammed car. Traction rods control how the rear knuckle pitches under acceleration and braking, affecting bump steer and anti-squat. The rear upper control arms adjust rear camber. Together they give the S14 full rear geometry control.
Pro Series vs Basic
The Pro line builds on ISR's Basic Street Series arms with spherical rod bearings, larger rod ends, dust boots, thicker materials and extra bracing, so the arms hold up to repeated track use. The same angled toe rods and traction rods in this package are also sold separately if you only need to replace one pair.
After Installation
Have the car aligned once ride height is finalized, and periodically check the rod end jam nuts.
All ISR Performance products are designed for off-road use only.