ISR Performance PRO Suspension Arm kit - Nissan 240sx 95-98 S14

The ISR Performance Pro Series suspension arm kit for the 1995 to 1998 Nissan 240SX S14 bundles ISR's adjustable arms into one package for owners correcting alignment on a lowered car or setting up a drift or track chassis. Once an S14 comes down on coilovers, the factory fixed-length arms leave camber and toe outside of where you want them, and the only real fix is adjustable arms.

Why a full arm kit

Buying the arms as a set means the adjustable links go in at the same time, so your alignment shop can set camber, toe and the related geometry together instead of chasing one setting while another stays fixed. ISR's Pro Series arms are designed for the S14 and built for the loads a drift or track car puts through the suspension.

Fitment

Nissan 240SX, S14 chassis, 1995 to 1998.

Before you install

Have the car at its final ride height before adjusting the arms, mark the factory arm lengths as a starting reference, and book a proper alignment afterward. Rod ends and adjusters should be checked for tightness after the first few hundred miles, and again after any hard track or drift session.

Kit contents

Contact Ace Up Motorsports for the current list of arms included in the Pro Series S14 kit before ordering if you need to confirm a specific arm is part of the package.

All ISR Performance products are designed for off-road use only.