ISR Performance Driveshaft – LS Swap S14 Non ABS – Steel

The ISR Performance steel LS swap driveshaft for the non-ABS S14 240SX gives the 1995 to 1998 chassis a correctly sized shaft for the V8 conversion. It is dimensioned around the ISR LS swap mounts and fitted with the non-ABS S14 differential flange pattern.

Steel driveshaft benefits

Steel is the proven choice for builders who prioritize toughness and value. It tolerates abuse better than aluminum, is less likely to be damaged by a stray rock or jack handle, and costs less. The main trade-off is weight, which matters less on a street car than it does on a dedicated track build.

• Steel tube driveshaft
• Cut to the LS swap length for the S14
• Non-ABS S14 differential flange

Fitment

Nissan 240SX S14 (1995 to 1998) with LS engine swap and non-ABS rear differential. ABS cars use a different diff flange and need the ABS version.

Installing

Check the differential flange style first. Fit the shaft, confirm slip yoke depth, and run the suspension through its travel to check tunnel and exhaust clearance. Torque the flange bolts and inspect them again after a short shakedown drive.

All ISR Performance products are designed for off-road use only.