ISR Performance Driveshaft – LS Swap S14 ABS – Steel

Made for the ABS-equipped 1995 to 1998 Nissan 240SX S14, this ISR Performance steel driveshaft finishes an LS swap with a shaft that matches both the ISR mount transmission position and the ABS differential flange. No measuring, no shortening and no waiting on a custom shop.

The case for steel

A steel driveshaft is heavier than aluminum but harder to damage, which is why many drift and street builders prefer it. It also comes in at a lower price, freeing budget for other parts of the swap. Behind an LS, a steel shaft has more than enough strength for the job.

• Steel construction
• LS swap length for the S14 chassis
• ABS differential flange pattern

Application

Nissan 240SX S14, 1995 to 1998, LS engine swap, factory ABS rear differential. Non-ABS S14s take the non-ABS version.

Install notes

Make sure your diff flange is the ABS style. Install with the car at ride height, verify driveline angles and clearance to the tunnel, and torque the flange hardware to spec. Give the bolts a re-torque after the first few miles.

All ISR Performance products are designed for off-road use only.