ISR Performance Steel Oil Pan - Nissan SR20DET S13/S14

The ISR Performance V2 steel oil pan for the SR20DET takes the original ISR oil pan concept and builds it in precision TIG welded stainless steel, adding a sensor port along the way. If you want extra capacity, real baffling and a place to read oil temperature, this is the pan for S13 and S14 SR20DET engines.

What Is New in V2

• Precision TIG welded stainless steel construction.
• Auxiliary 1/8 PT oil temperature sensor port built into the pan.
• Increased oil capacity over the factory pan.
• Recessed area in the bottom of the pan for better oil pickup.
• Baffles that keep the pickup fed during hard cornering.

Who It Is For

Recommended on every SR20DET, and especially worthwhile on cars that see sustained lateral load: drift, time attack, autocross, or canyon driving. It is an inexpensive alternative to the other brands offering similar stainless pans.

Fitment

Nissan SR20DET S13 and S14 engines.

Install Advice

Stainless is less forgiving of a warped sealing surface than cast aluminum, so clean the block flange carefully and lay down an even bead of oil-resistant RTV. Install an oil temperature sender in the 1/8 PT port before the pan goes on, or plug it, and route the sensor wire away from the exhaust. As with any larger pan, set your oil level by the dipstick after the first heat cycle.

All ISR Performance products are designed for off-road use only.