ISR Performance OE Replacement Valve Cover Gasket - RWD SR20DET S14

A brittle valve cover gasket is one of the most common oil leaks on an aging S14 SR20DET, leaving oil in the spark plug wells and along the exhaust side of the head. The ISR Performance OE replacement valve cover gasket for the S14 SR20DET RWD engine is the straightforward fix: a fresh gasket that seals the cover to the head the way it did from the factory.

Fitment

• Nissan S14 SR20DET, rear wheel drive engine
• Will not work on the S13 SR20DET, which uses a different valve cover

Kit includes

Valve cover gasket only. Spark plug well seals and valve cover bolt grommets are not part of this kit.

Installation pointers

• Clean the gasket channel in the valve cover and the head surface of all old sealant and oil
• Apply a small amount of RTV at the corners where the cam caps meet the head
• Torque the valve cover bolts evenly and to spec; overtightening squeezes the gasket out and starts the leak again
• Replace the spark plug well seals at the same time if they are hard or cracked

Keep one of these on the shelf if you are doing cam work, timing chain inspection or anything else that has the valve cover off an S14 SR.

All ISR Performance products are designed for off-road use only.