ISR Performance Intake Manifold Cold Pipe - "for isis and old greddy style intakes"

The ISR Performance intake manifold cold pipe for the Nissan SR20DET S13 is the cold side intercooler pipe for cars running an aftermarket intake manifold. ISR built it around its own intake manifold and the older Greddy style manifolds that move the throttle body from the factory position, so the pipe reaches the relocated throttle body cleanly.

Details

• Cold side charge pipe from the intercooler outlet to an aftermarket intake manifold throttle body
• Made for ISR and old Greddy style intake manifolds
• Replaces the stock-manifold cold pipe from a front mount kit

Why a Different Cold Pipe

Swapping to a forward-facing or side-exit aftermarket intake manifold changes where the throttle body sits, which means the cold pipe from a standard front mount kit no longer reaches, or hits the strut tower on the way. Rather than hacking the stock-manifold pipe, this piece drops in and gets the charge path back to a smooth, properly aligned run.

Applications

Nissan SR20DET S13 with an ISR intake manifold or an old Greddy style intake manifold. Not for the factory intake manifold; the stock-manifold cold pipe is listed separately.

Install Notes

Verify the throttle body inlet diameter on your manifold and match the coupler accordingly. Check clearance to the brake master cylinder and the firewall-side harness when the pipe is in place.

All ISR Performance products are designed for off-road use only.