ISR Performance High Pressure Power Steering Line - Nissan 350Z

The ISR Performance high pressure power steering line for the Nissan 350Z is a complete replacement for the factory high pressure hose, built from -6 AN line with a Hytrel covering. It ships with both fittings attached, so it goes in as a direct OEM replacement without any cutting, crimping or custom fabrication.

Why replace the factory high pressure line

The high pressure side of the power steering system takes the most abuse: constant pump pressure, heat from the exhaust and engine, and years of flexing. Once a factory hose starts seeping or the crimp lets go, the fix is usually a trip to the dealer or a hose shop. This ISR line solves it with a hose that handles the pressure and heat, and it looks far cleaner than a rubber replacement.

Construction

• -6 AN hose for the full run of the high pressure line
• Hytrel covering over the hose for added durability and improved appearance
• Two fittings pre-installed for a complete OEM replacement

Fitment

Nissan 350Z.

What's included

One high pressure power steering line with two fittings. Nothing else is required to replace the factory high pressure hose.

Install notes

Drain the reservoir before removing the old line to keep the mess down, then bleed the system by cycling the wheel lock to lock with the front end lifted. Check the fittings for seepage after the first heat cycle.

All ISR Performance products are designed for off-road use only.