ISR Performance Clutch Line - Nissan 350Z (Long)

This ISR Performance clutch line for the Nissan 350Z is the long version, built to run the full distance from the clutch master cylinder to the slave cylinder. It replaces both the factory soft rubber section and the hard line in one piece, which removes the flex in the stock setup and gives a firmer, more consistent pedal.

How it is built

• Stainless braided hose from end to end
• PVC protective covering over the braid to resist chafing
• All fittings and washers supplied in the box

Why a full length clutch line

The factory 350Z clutch hydraulics use a rubber hose that swells slightly under pressure and a hard line that is a pain to replace on its own. Swapping to a single braided line master to slave eliminates the swell, gets rid of the aging rubber, and gives you one straightforward run to route and bleed. The result is a pedal that engages at the same point every time, lap after lap.

Fitment

Nissan 350Z. This is the long, master to slave version. ISR also makes a shorty line for the 03-06 350Z that replaces only the soft section.

Included hardware

Clutch line, fittings and washers. No additional adapters are needed for the factory master and slave cylinders.

Installation

Route the line away from the exhaust and any moving parts, torque the fittings with fresh washers, and bleed the clutch thoroughly before driving.

All ISR Performance products are designed for off-road use only.