ISR Performance Driveshaft – LS Swap S13 ABS – Steel

This ISR Performance steel driveshaft connects an LS swap to the rear end of an ABS-equipped Nissan 240SX S13. The ABS differential on these cars has its own flange pattern, and this shaft is made with that pattern so it bolts straight on, at the length the ISR LS mounts put the transmission.

Why choose steel

A steel driveshaft is the workhorse option. It shrugs off road debris and the occasional hard landing, costs less than aluminum and has a long track record behind big torque engines. The weight penalty over aluminum is real but modest, and for a street or drift S13 it is rarely the limiting factor.

• Steel construction
• LS swap length for the S13 chassis
• ABS differential flange pattern

Application

Nissan 240SX S13, LS engine swap, factory ABS rear differential. Not compatible with the non-ABS S13 diff flange.

Install notes

Verify the ABS flange on your differential before buying. Install at ride height so you can confirm driveline angles, make sure nothing contacts the tunnel or exhaust, and torque the flange hardware. Recheck the bolts after the first drive.

All ISR Performance products are designed for off-road use only.