ISR Performance Shorty Clutch Line - 07-10 Nissan 350Z

The ISR Performance shorty clutch line for the 2007 to 2010 Nissan 350Z replaces the long factory run between the clutch master cylinder and the slave with a short, direct line. The later Z33 clutch hydraulics are known for a soft, inconsistent pedal, and going to a short line is a common fix, especially on cars that see hard shifting or track time.

What it does

A shorter path with less flex means the pedal moves fluid more directly to the slave cylinder. Drivers typically report a firmer, more predictable engagement point and less change in pedal feel as the fluid heats up. It is a low cost, bolt-on change that pairs well with a fresh clutch install or a fluid flush.

Application

Designed for the 2007 to 2010 Nissan 350Z. Confirm your model year before ordering, since clutch hydraulic routing differs on earlier Z33 cars.

In the box

• 1x short clutch line
• 1x banjo bolt
• 2x crush washers

Install notes

Use the supplied crush washers at the banjo fitting, one on each side, and bleed the clutch system completely after installation. Plan on a full bleed with fresh brake fluid, and check the banjo for seepage after the first few drives.

All ISR Performance products are designed for off-road use only.