ISR Hotpipe w/BOV Flange - Nissan SR20DET S13

The ISR Performance hot pipe with BOV flange for the Nissan SR20DET S13 replaces the factory hot side intercooler pipe with a mandrel bent aluminum pipe that gives you a proper place to mount a blow off valve. It is the piece between the turbo compressor outlet and the intercooler inlet, and it is a common upgrade when the stock rubber and plastic sections are cracked, leaking or in the way of a front mount setup.

Details

• Mandrel bent aluminum construction
• Blow off valve flange provision built into the pipe
• Couplers and clamps included
• Designed around the ISR S13 intercooler kit

Flange note

To complete the hot pipe with a flange, the matching flange must be added. Choose the one that matches your blow off valve pattern:

• GReddy style flange: IS-FLA-001
• HKS style flange: IS-FLA-002

Compatibility

Nissan 240SX S13 with the SR20DET. Works with the ISR S13 intercooler kit and most front mount intercooler setups.

Install considerations

Because this pipe runs on the pressurized side, make sure the couplers are fully seated and the clamps are tight before boosting. If you are adding a BOV for the first time, plan the vacuum line routing to the intake manifold while the pipe is out of the car.

Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

All ISR Performance products are designed for off-road use only.