ISR Performance Wheel Spacers - 4/5x114.3 Bolt Pattern - 66.1mm Bore - 5mm Thick (Individual)

At 5mm thick, this ISR Performance wheel spacer is the thinnest in the range and is made for small fitment corrections rather than big stance changes. It is drilled for both 4x114.3 and 5x114.3 bolt patterns with a 66.1mm center bore, so it works on 4 lug and 5 lug Nissan hubs alike. Sold individually, one spacer per order.

Where a 5mm spacer earns its place

A few millimeters is often all that separates a wheel that rubs the coilover body from one that clears it, or a brake caliper that touches the spoke from one that does not. The 5mm spacer solves those problems without materially changing scrub radius or requiring extended studs in most cases.

Spacer specifications

• Thickness: 5mm
• Bolt patterns: 4x114.3 and 5x114.3
• Center bore: 66.1mm
• Sold individually

Applications

Nissan hubs with a 4x114.3 or 5x114.3 pattern and 66.1mm hub diameter, including the 240SX, 350Z and related chassis. Verify your hub bore and pattern before ordering.

Usage notes

A slip-on spacer this thin still requires enough stud length for full lug nut engagement, so check thread engagement after fitting. Torque lug nuts to spec and recheck after the first drive.

All ISR Performance products are designed for off-road use only.