ISR Performance - Injector Connector Pigtail - Jetronic - (individual)

This ISR Performance injector connector pigtail is the Jetronic (also called EV1) style plug, sold individually, for wiring up injectors that use the Jetronic connector such as the ISR 1200cc top feed injectors. When you swap to larger injectors with a different plug than your factory harness, a pigtail lets you make a clean soldered or crimped connection instead of improvising with the wrong terminals.

Why you need one

ISR top feed injectors are sold without pigtails or connectors, so if your engine harness does not already have Jetronic plugs you will need one of these per injector. The pigtail gives you the plug body with lead wires ready to be spliced into your harness.

Compatibility

• Jetronic connector style injectors
• ISR Performance 1200cc top feed injectors

Ordering

Sold individually. Order one per injector: four for an SR20DET or KA24DE, six for an RB or JZ.

Not the right plug? The USCAR pigtail is the matching option for ISR 750cc and 1000cc top feed injectors.

Wiring tip

Stagger your splices so the joints do not sit side by side in one thick bundle, seal each one with adhesive lined heat shrink, and leave a little slack at the injector so the plug can be removed for service without pulling on the wire.

All ISR Performance products are designed for off-road use only.