ISR Performance - Injector Connector Pigtail - USCAR - (individual)

Sold one at a time, the ISR Performance USCAR injector connector pigtail gives you the plug you need for USCAR (EV6) style injectors, including the ISR Performance 750cc and 1000cc top feed injectors. If your car came with a different injector connector, these let you adapt the factory harness without cutting up a donor loom.

Where it fits in

ISR's top feed injector sets ship without connectors. Pair this pigtail with each injector when converting an SR20DET, KA24DE, RB or similar engine from its original plug style to the USCAR interface, or when repairing a damaged connector on a harness that already uses USCAR plugs.

Works with

• USCAR connector style injectors
• ISR Performance 750cc top feed injectors
• ISR Performance 1000cc top feed injectors

How many to order

One pigtail per injector. A four cylinder needs four, a six cylinder needs six. Running the ISR 1200cc injectors instead? Those use the Jetronic plug, so grab the Jetronic pigtail for that set.

Install tip

Solder and heat shrink or use quality crimp splices and seal the joints. Keep wire colors consistent and label each lead before cutting into the harness so the injector wiring order stays correct.

All ISR Performance products are designed for off-road use only.