ISR Performance Stainless Steel Clutch line Kit (Shorty) - Nissan 240sx 89-98

The ISR Performance stainless steel shorty clutch line kit for the 1989 to 1998 Nissan 240SX replaces the short flexible rubber section in the factory clutch hydraulics and takes the flex out of the system. The result is a more consistent, firmer clutch pedal that behaves the same on the tenth hard launch as it did on the first.

How It Is Built

• PTFE hose with an extruded PTFE core and stainless steel wire braided cover, reducing volumetric expansion.
• Permanently crimped zinc plated steel fittings.
• Yellow PVC outer jacket to guard against abrasion and corrosion.
• Two-piece fitting and line design: thread the fitting in first, then connect the line, no twisting the hose to seat it.

The Case Against Stock Rubber

Factory rubber clutch lines swell and expand with age and continuous use, and the rubber jacket breaks down from ozone exposure. Under autocross, track or aggressive street use, a rubber line is also exposed to road debris. The braided stainless cover shrugs off those hazards and tidies up the engine bay at the same time.

Fits

Nissan 240SX 1989 to 1998, S13 and S14, with a factory manual transmission.

Installation

A helpful install write-up covering this swap alongside the clutch damper removal is available at garage.projectraine.com (content_guides/240_clutchdamper). Bleed the system thoroughly after fitting.

All ISR Performance products are designed for off-road use only.