ISR Performance Rear Camber Arms - Hyundai Genesis Coupe - Pro

The ISR Performance Pro rear camber arms for the Hyundai Genesis Coupe (part number IS-EL-018-PRO) add rear camber adjustment to a chassis that leaves the factory without any. Lower a Genesis Coupe and the rear wheels tip inward at the top. These arms let you set that angle on purpose, for grip on track or for tire life on the street.

Why camber arms

Camber is the single most important rear alignment setting for how the tire meets the road under cornering load. With an adjustable camber arm you can:

• Pull rear camber back toward factory spec on a lowered daily driver
• Run more negative camber for a track or autocross setup
• Balance rear grip against the front to tune understeer or oversteer
• Replace worn factory arms with a stiffer, adjustable part

Pro specification

This is the Pro version in ISR's Genesis Coupe lineup. It is a separate part from the ISR rear upper arm, rear lower control arm and rear toe rod for the same car, and it works alongside them.

Fits

• Hyundai Genesis Coupe

What's in the box

• 1x driver side rear camber arm
• 1x passenger side rear camber arm

Install note

Changing camber moves rear toe, so budget for an alignment that sets both. Torque pivots with the suspension loaded, and re-check the settings after the first few hundred miles.

All ISR Performance products are designed for off-road use only.