ISR Performance Front Lower Control Arm - Hyundai Genesis Coupe 09+ - PRO

The ISR Performance Pro front lower control arm for the 2009 and up Hyundai Genesis Coupe is the Pro-grade replacement for the factory lower arm, sold as a driver and passenger pair. On a lowered Genesis Coupe the front lower arm determines where the bottom of the hub sits, so it is the piece to upgrade when you want control over front track width and camber rather than accepting whatever the drop produces.

Benefits over the factory arm

• Control over front geometry on a lowered car
• Removes the flex of the stock rubber-bushed arm under cornering load
• A stronger assembly for cars that see track days or drift events
• Replaces aging factory arms and ball joints in one step

Pro Series positioning

ISR offers this arm as their Pro option for the Genesis Coupe, the higher-spec version in the ISR lineup for the chassis.

Fits

• Hyundai Genesis Coupe, 2009 and up

Box contents

• 1x driver side front lower control arm
• 1x passenger side front lower control arm

Installation

Support the suspension when removing the factory arm, transfer or replace any hardware as required, and torque the pivots with the suspension loaded at ride height. Since the lower arm affects camber and toe, finish with a full alignment. Combine with ISR's Pro front tension rods for the Genesis Coupe for a complete front-end geometry setup.

All ISR Performance products are designed for off-road use only.