ISR Performance Rear Lower Control Arm - Hyundai Genesis Coupe - 09+ - PRO

When a Genesis Coupe is lowered, the rear lower control arm becomes the limiting factor on how well the rear suspension can be set up. The ISR Performance Pro rear lower control arm for the 2009 and up Hyundai Genesis Coupe replaces the fixed factory arm on both sides of the car, giving you a Pro-grade lower arm to work with when setting rear camber and track.

Role of the rear lower arm

The lower arm locates the bottom of the rear hub. Changing it affects:

• Rear camber, in combination with the upper arm
• Rear track width and where the wheel sits in the arch
• Rear grip balance for track and autocross setups
• Deflection under load, which an uprated arm reduces

Which arm is this

This listing is for ISR's Pro version of the rear lower control arm. It is a different part from the rear upper arm, rear toe rod and rear camber arm ISR also offers for the Genesis Coupe, and the four are often run together.

Compatibility

• Hyundai Genesis Coupe, 2009 and newer

What you receive

• 1x driver side rear lower control arm
• 1x passenger side rear lower control arm

Setup

Install with the car supported, torque pivot bolts at ride height to avoid preloading the bushings or bearings, and align afterward. Rear toe should be set last.

All ISR Performance products are designed for off-road use only.