ISR Performance Rear Camber Arms - Infiniti G37 Coupe

Lowering an Infiniti G37 Coupe pushes rear camber and toe away from factory spec, and the stock arms give you no way to bring them back. The ISR Performance rear camber arm set for the G37 Coupe solves the camber side of that equation with an angled arm design that delivers a wide adjustment range while still keeping ample clearance from the surrounding suspension components.

Design points

• Angled construction keeps the arm clear of other rear suspension parts at both ends of its travel
• Maximum range of camber adjustment for lowered and track aligned cars
• Rod end spacers included for correct mounting

Pair with toe arms

Camber and toe move together as ride height drops. ISR strongly recommends running the ISR Performance Pro Series toe arms alongside these camber arms so the rear of the car can be fully aligned in both planes. Without adjustable toe arms you will likely run out of alignment range on a lowered G37.

Fitment

Infiniti G37 Coupe only. These arms are not designed for the G37 Sedan or other chassis.

What is in the box

• 2x rear camber arms
• 2x rear camber arm rod end spacers

Have the car aligned after installation and recheck fasteners after the first few drives.

All ISR Performance products are designed for off-road use only.

Legal in California only for racing vehicles which may never be used, or registered or licensed for use, upon a highway.