ISR Performance OE Replacement Hyundai 5 bolt turbine outlet gasket for 2013+ Genesis Coupe 2.0T

Built for the 2013 and newer Hyundai Genesis Coupe 2.0T, this ISR Performance OE replacement 5 bolt turbine outlet gasket seals the factory turbocharger to the downpipe. Genesis Coupe owners fitting an aftermarket downpipe or pulling the turbo for service need this gasket, and it is one of the few OE replacement items for the BK2 2.0T that ISR has added to its range.

Where it fits on the 2.0T

The turbine outlet on the 2013+ 2.0T uses a 5 bolt pattern between the turbine housing and the downpipe flange. This joint sees the full heat of the exhaust and is the most common place for an exhaust leak after downpipe work.

Gasket facts

• 5 bolt turbine outlet pattern
• OE replacement specification for the 2013+ Genesis Coupe 2.0T
• Produced by ISR Performance alongside its 2.0T turbo and exhaust parts

Vehicle application

Hyundai Genesis Coupe 2.0T, 2013 and up. This gasket is not for the 2010 to 2012 2.0T, which uses a different turbo and flange layout, and not for the 3.8 V6.

Install reminder

Scrape both flange faces clean, replace any bolts that show heat damage, and tighten in a cross pattern. Recheck torque after the first few heat cycles, since downpipe joints can relax slightly as the hardware settles.

All ISR Performance products are designed for off-road use only.