ISR Performance OE Replacement Engine Gasket Kit - Nissan SR20DET S13

Put together for a full reseal of an S13 RWD SR20DET, this ISR Performance OE replacement engine gasket kit bundles the main seals, valve stem seals, intake and exhaust gaskets, turbo flange gaskets and oiling system seals that a rebuild or swap usually needs. Instead of chasing twenty different part numbers for an SR20DET, you get them in a single kit sized for the S13 engine.

Built around ISR's OE replacement program

ISR Performance expanded its OE replacement line after the success of its earlier service parts, with a focus on hard to find JDM items that are a hassle to source individually. This gasket kit is the result: every piece is an ISR OE replacement gasket for the RWD SR20DET.

Kit contents

• Rear main seal
• Front main seal
• Intake valve seals
• Exhaust valve seals
• Timing chain tensioner gasket
• S13 valve cover gasket set
• S13 intake collector gasket
• S13 intake manifold gasket
• S13/S14/S15 exhaust manifold gasket
• Turbine inlet gasket (4 bolt)
• T25 turbine outlet gasket (5 bolt)
• T25/T28 compressor outlet gasket (3 bolt)
• Oil pick up tube gasket
• Oil pump front cover O-ring
• T25 turbo oil drain gasket
• Oil filler cap O-ring
• S13 throttle body gasket
• Side feed injector O-ring pack, including FPR O-ring
• Cam angle sensor O-ring
• S13 idle air control valve (IACV) gasket

Application

Nissan RWD SR20DET as fitted to the S13 240SX and Silvia. The exhaust manifold gasket also covers S14 and S15 engines, but the collector, manifold, throttle body, IACV and valve cover pieces are S13 specific.

Before you start

Clean every sealing surface completely and replace the valve stem seals with the proper installation tool so the lips are not torn. A head gasket is not part of this kit, so source one separately if the head is coming off.

All ISR Performance products are designed for off-road use only.