ISR Performance M-Spec Intercooler CORE

The ISR Performance M-Spec intercooler core is the bar and plate core from ISR's M-Spec front mount kit for the Nissan 240SX S13, available on its own. If your piping is already in place and the core is what needs replacing, or you want to upgrade a tired core without buying a complete kit again, this is the part.

About the Core

• M-Spec sized front mount intercooler core
• The same core supplied in the ISR M-Spec S13 intercooler kit
• Core only; piping, couplers and clamps are not included

Why the M-Spec Size Matters

The original Greddy M-Spec core became the reference size for S13 front mounts because it fills the opening behind the bumper without forcing you to cut the radiator support or trim the bumper beam. Running a core in this footprint means existing M-Spec pattern piping, whether ISR or older Greddy, lines up with the end tanks.

Fitment

Nissan 240SX S13 front mount intercooler applications using M-Spec pattern piping. Compare your current core's end tank positions and mounting points if you are not running ISR piping.

Install Notes

Handle the core by the end tanks rather than the fins. Before mounting, blow out the core to remove any debris from storage, and check that the mounting tabs land on solid points of the radiator support.

All ISR Performance products are designed for off-road use only.