ISR Performance

ISR Performance 70mm Long Wheel Studs - Nissan 240sx 95-98 S14 Front - 14.25MM KNURL

$2.88
( 0 Reviews )
Trust Badge

Current stock: 255

The ISR Performance 70mm long wheel stud in the 14.25mm knurl size is made specifically for the front hubs of the 1995 to 1998 Nissan 240SX S14, which use a larger knurl bore than the S13 or the S14 rear. Extra length means you can run spacers and open-ended lug nuts with full thread engagement instead of hanging the wheel on a handful of threads.

Why upgrade the front studs

Factory studs are adequate for stock wheels, but spacers eat into available thread. Running short on engagement is a wheel-off waiting to happen. These studs restore that margin while using a stronger heat treated alloy and a durable coating that resists corrosion and galling.

  • 70mm long
  • Easy start threads
  • 14.25mm knurl
  • M12 x 1.25mm thread pitch
  • Heat treated with protective coating

Fitment

Nissan 240SX S14 front hubs only, 1995 to 1998. Designed for the factory Nissan hub knurl. Do not use on S13 hubs or S14 rear hubs, which take the 12.85mm knurl stud.

Installation

Priced per stud. Install with the hub supported so the knurl seats straight, and avoid using an impact gun to draw the stud through, which can damage the knurl engagement.

All ISR Performance products are designed for off-road use only.

0 Reviews

Be the first to review this product.

Add a Review

ISR Performance 70mm Long Wheel Studs - Nissan 240sx 95-98 S14 Front - 14.25MM KNURL