ISR Performance 70mm Long Wheel Stud - Nissan 240sx 89-94 S13 Front /Rear and S14 Rear - 12.85MM KNURL

This ISR Performance 70mm long wheel stud with a 12.85mm knurl fits the front and rear hubs of the 1989 to 1994 Nissan 240SX S13 and the rear hubs of the 1995 to 1998 S14. Longer studs are a practical requirement once you add wheel spacers or switch to open-ended lug nuts, since the factory stud length leaves too little thread engagement in those situations.

Construction

Compared to the OEM stud, the ISR version is made from stronger heat treated material with a protective coating, which helps the stud tolerate repeated wheel changes and the higher clamping loads of track use.

• 70mm overall length
• Easy start threads for quicker lug installation
• 12.85mm knurl diameter
• M12 x 1.25mm thread pitch
• Heat treated and coated for strength and durability

Fitment

Nissan 240SX S13 (1989 to 1994) front and rear hubs, and Nissan 240SX S14 (1995 to 1998) rear hubs. Made for the factory Nissan hub knurl only. S14 front hubs use a larger 14.25mm knurl and need the matching stud.

Install tips

Sold individually, so order the quantity your hubs require. Press or draw the stud into the hub squarely. Mismatched knurl size will either strip the hub or spin in the bore, so verify the knurl before installing.

All ISR Performance products are designed for off-road use only.