J Replace Hood Bump Stop for Nissan 240sx S13 Inner USDM

The J Replace OE replacement hood bump stop for the USDM Nissan 240SX S13 is the inner rubber stop that mounts on the inner core support brackets and cushions the hood when it closes. Original stops perish, crack and fall out over time, leaving the hood to rattle at speed or sit unevenly across the fenders.

Details

• OE replacement hood bump stop, inner USDM position
• Mounts on the inner core support brackets
• Quantity of two needed for each car

Fitment

Nissan 240SX S13, 1989 to 1994, USDM inner hood stop locations.

What Bump Stops Do

Hood bump stops set the hood's resting height at the front and keep it from chattering against the core support. Missing or collapsed stops are a common cause of a hood that sits lower than the fender line on one side, and they are the first thing to check before adjusting the latch or hinges. Because they thread into the core support, they also let you fine tune the hood height for even panel gaps.

Install Note

Remove the old stops, clean the threads in the core support, and thread in the new stops. Close the hood gently and adjust each stop up or down until the hood sits flush with the fenders, then confirm the latch still engages cleanly. Order two to replace both inner positions.

With limited availability and frequently increasing prices on new OEM parts, J Replace offers a quality alternative at a steady price.

Note: Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways, and also for use in other exempted vehicles.