J Replace OE Replacement Stamped Steel Front Left Fender - Nissan 240sx / 180sx S13 89-94

The J Replace OE replacement stamped steel front left fender gives 1989 to 1994 S13 Nissan 240SX and 180SX owners a lower cost alternative to the genuine Nissan panel when the original is rusted, dented or missing. It is pressed in steel like the factory part and follows the OEM shape and mounting points, so the car keeps its stock lines instead of the softer edges of a fiberglass fender.

Panel Details

• Stamped steel construction matching the OEM profile
• Driver side (left) front fender
• Rust preventive coating applied, but this is not a finish coat
• Requires prep work, finishing and paint before installation

Fitment

1989 to 1994 Nissan 240SX and 180SX, S13 chassis, left side.

Fitment Notes

• OEM door tabs may need adjustment, since the factory tabs in the door jamb move very easily.
• The bottom front fender brace and mount significantly affects the fitment of both the headlight and the mounting holes near the headlight.
• Any movement in the pinch welds from improper jacking can affect all of the above if you try to bolt the fender on despite misalignment.
• Existing chassis damage will also impact proper fitment.

Complete the Front End

For a finished look, add the matching bumper extensions or speed panels: the 180SX Kouki JDM Type X bumper extension and speed panel pair, or the J Replace 240SX Chuki USDM bumper extension and speed panel pair.