ISR Performance - Silicone Coupler - 2.00-2.25" - Black

This ISR Performance silicone reducer coupler steps from 2.00 inch to 2.25 inch, letting you join two pipe sizes that would otherwise need a fabricated transition. It is a black straight reducer, and the quarter-inch step makes it useful where a 2 inch turbo outlet or intake tube meets 2.25 inch piping, or where a mass airflow housing is slightly larger than the tube feeding it. The silicone construction handles heat, flexes with engine movement, and seals under pressure.

Reducer specs

• Straight reducer, 2.00 inch on one end and 2.25 inch on the other
• Black silicone
• Smooth internal transition between the two sizes
• Sold as a single coupler

Compatibility

Universal. Joins 2.00 inch OD tubing to 2.25 inch OD tubing in intercooler, intake or custom charge piping on any vehicle. Confirm both pipe sizes with calipers before ordering so each end of the reducer matches.

Installation

Each end needs its own T-bolt clamp: one sized for 2 inch pipe and one for 2.25 inch. Slide the larger end on first if access is tight, then the smaller, and tighten evenly. Keep the pipe ends from pushing against the internal step in the coupler. Weight is approximately 1 lb.

All ISR Performance products are designed for off-road use only.