ISR Performance - Silicone Coupler - 2.00 - 2.50" 90 Degree - Black

The ISR Performance 2.00 to 2.50 inch 90 degree silicone reducer is a black elbow that turns a corner while stepping from 2 inch to 2.5 inch. On a 240SX turbo build this is a very practical piece: many turbo compressor outlets are around 2 inch, the intercooler piping is 2.5 inch, and the pipe usually has to turn hard right off the turbo to head toward the intercooler. This coupler handles both the size change and the turn in one silicone part that resists heat and holds boost.

Specifications

• 90 degree reducer elbow, 2.00 inch to 2.50 inch
• Black silicone construction
• Half-inch size change across the bend
• One elbow per order

Where it fits

Universal part connecting 2.00 inch OD tubing to 2.50 inch OD tubing at 90 degrees. Common on turbo outlets and intake tubes, but usable in any piping system with these two sizes. Verify both pipe diameters before ordering.

Fitting notes

Clamp the small leg with a 2 inch T-bolt clamp and the large leg with a 2.5 inch clamp, both placed on the straight section of the leg. If the small leg is on a turbo outlet, keep the silicone clear of the turbine housing and downpipe heat. Beaded pipe ends are recommended. Weight is around 1 lb.

All ISR Performance products are designed for off-road use only.