ISR Performance - Silicone Coupler - 2.00 - 2.25" 90 Degree - Black

This ISR Performance 2.00 to 2.25 inch 90 degree silicone reducer combines two jobs in one black coupler: it turns the pipe through a right angle and steps the diameter from 2 inch to 2.25 inch at the same time. That is useful where a 2 inch turbo outlet or intake tube has to turn immediately into 2.25 inch piping, which is a common situation on small-turbo builds with tight clearance. Silicone construction keeps the joint flexible, heat resistant, and sealed under boost.

What it does

• 90 degree elbow with a 2.00 inch leg and a 2.25 inch leg
• Black silicone
• Replaces a separate elbow and reducer
• Sold individually

Compatibility

Universal. Joins 2.00 inch OD tubing to 2.25 inch OD tubing at a right angle on intake, intercooler or custom charge piping for any vehicle. Measure both pipes before ordering so each leg matches its pipe.

Installation

Each leg needs its own T-bolt clamp: 2 inch on the small leg and 2.25 inch on the large leg. Position both clamps over the straight section of each leg. Because a reducing elbow sees side load under boost, beaded pipe ends help it stay put. Weight is approximately 1 lb.

All ISR Performance products are designed for off-road use only.