ISR Performance Front Upper Camber Arms - Nissan 370Z / Infiniti G37

The ISR Performance front upper camber arms for the Nissan 370Z and Infiniti G37 give lowered cars a way to bring front camber back into spec, and they do it without the hassle most adjustable arms involve. Length is set with a 19mm wrench while the arm is on the car; nothing has to be unbolted and the ball joint stays in place.

Features

• Wide range of camber adjustment for the Z34 and V36 front suspension
• On-car adjustment with a 19mm wrench, no component removal
• High quality serviceable ball joint
• Sold as a pair, left and right

Understand the chassis limit

On the factory 370Z and G37, the upper arm can only extend so far before it contacts the control arm recess in the chassis at a given ride height. These ISR arms generally offer more adjustment range than that recess allows. If you want to dial out the negative camber gained from lowering the car, you may need to modify the factory control arm recess for extra clearance, depending on the alignment numbers you are chasing. Leave the recess alone and the arm's usable length, and therefore the camber correction, is limited by the chassis rather than the arm.

Fitment

• Nissan 370Z Z34
• Infiniti G37 V36

Clearance warning

On vehicles lowered excessively, check clearance between the arm and the chassis metal through the full range of suspension travel. Contact with the chassis can damage the arm and/or the adjusters.

After installation

Get a full alignment once the arms are in. Camber changes affect toe, and the adjusters should be locked at the final setting.

All ISR Performance products are designed for off-road use only.