ISR Performance

ISR Performance PRO V2 Suspension Arm Kit - NISSAN 240SX 89-94 S13

$806.96
( 0 Reviews )
Trust Badge

Current stock:

The ISR Performance PRO V2 suspension arm kit for the 1989 to 1994 Nissan 240SX S13 bundles the four Pro Series arms that matter most on a lowered, hard driven S chassis. Offered exclusively at Ace Up, the V2 package combines offset front tension rods, angled rear toe rods, rear traction rods and rear upper control arms, all built on Japanese spherical bearings with larger rod ends.

What Is in the V2 Kit

  • Offset PRO front tension rods: more steering angle before the wheel hits the tension rod
  • Angled PRO rear toe control arms: extra clearance so a low car does not bottom the arms on the rear subframe bushings, plus rear toe adjustment for more or less grip
  • PRO traction rods: bump steer correction, improved traction and quicker rear suspension response
  • PRO rear upper control arms (RUCAs): a slight bend for travel on low cars, with camber adjustability

Pro Series Construction

  • Japanese spherical rod bearings
  • Larger rod ends
  • Rod end dust boots
  • Thicker materials
  • Added bracing

Fitment

Nissan 240SX S13, 1989 through 1994.

Who It Is For

If your S13 still rides on stock or worn out rubber bushed arms, this kit replaces them with adjustable spherical arms in one order rather than piecing them together. Drift cars gain angle from the offset tension rods and keep their geometry at low ride height thanks to the angled toe arms and bent RUCAs; grip cars get the adjustability to dial rear toe and camber precisely.

Setup Notes

Start each arm at stock length, set ride height, then do a full alignment. Spherical bearings add some road noise versus rubber, which is the expected tradeoff for the precision.

All ISR Performance products are designed for off-road use only.

0 Reviews

Be the first to review this product.

Add a Review

ISR Performance PRO V2 Suspension Arm Kit - NISSAN 240SX 89-94 S13