ISR Performance MB SE Exhaust Nissan 240sx 89-94 S13

The ISR Performance MB SE exhaust for the 1989 to 1994 Nissan 240SX S13 is a 3 inch catback with a single 4.5 inch tip. It uses a resonated front pipe and a 3 inch muffler section to give the S13 a clean, deep sound without the volume of a straight pipe setup, making it a solid everyday choice for a street driven 240.

Contents

• 1x resonated front pipe
• 1x 3 inch muffler section with 4.5 inch tip
• 2x 2 bolt 3 inch exhaust gaskets
• 4x bolts
• 4x nuts

Single tip, full 3 inch flow

Do not let the single exit fool you. The piping is 3 inch end to end, so this system flows the same as the dual tip MB SE Type E. The difference is purely in the rear: one large 4.5 inch tip instead of two 3 inch tips. Many S13 owners prefer the single tip look on the hatch and coupe rear bumpers, and it tucks neatly into the factory cutout.

Sound character

The resonator in the front pipe and the muffler at the rear work together to cut rasp and highway drone while keeping a noticeable growl under throttle. It is noticeably louder than stock but will not wear you out on a long drive.

Fitment

Nissan 240SX S13, 1989 to 1994. Works with KA24 and SR20DET powered cars that have a 3 inch 2 bolt flange at the end of the downpipe or test pipe.

Installation

Uses the included 2 bolt gaskets and hardware. Fit both sections loosely, align the tip, then torque down.

All ISR Performance products are designed for off-road use only.