ISR Performance Hose End Fitting - 8AN 90 Degree

The ISR Performance -8AN 90 Degree Hose End Fitting handles the -8AN connections where the hose needs to leave the port at a right angle. Turbo oil return lines are the textbook case: the drain port often faces a frame rail or the block, and a 90 degree end lets the line drop toward the pan without a kink. This lightweight black anodized universal hose end is the same part ISR has fitted to their turbo line kits for more than five years.

Fitting details

• Size: -8AN
• Angle: 90 degrees
• Black anodized finish
• Lightweight universal hose end
• Sold per single hose end

Routing with 90 degree ends

A -8AN line carries real volume, so plan your bends to keep the inside of the hose open. Put the 90 at the port that faces an obstruction and let the hose make long, gentle sweeps from there. On a turbo drain, keep the line falling continuously toward the pan with no low spots that can trap oil.

Matching parts

ISR -8AN braided black nylon hose, sold by the foot, and ISR -8AN straight and 45 degree ends round out the line. Order two ends for every hose.

All ISR Performance products are designed for off-road use only.