ISR Performance Hose End Fitting - 6AN 90 Degree

The ISR Performance -6AN 90 Degree Hose End Fitting makes a full right-angle turn at the port, which is what you reach for when there is simply no room for a hose to run straight out. Turbo oil feeds at the center housing, fuel rail ends near the firewall and oil pressure sender lines are all places where a 90 saves the day. It is lightweight, black anodized, and the same fitting ISR has used on their turbo line kits for over five years.

Specifications

• Size: -6AN
• Angle: 90 degrees
• Black anodized finish
• Lightweight universal hose end
• Priced per single hose end

When a 90 is the right end

Use a 90 degree end when the hose would otherwise need to bend sharply within an inch or two of the port. Forcing braided hose into that bend kinks it and restricts flow, and over time the strain works the fitting loose. The 90 does the turning so the hose can run relaxed. For less severe turns, the ISR -6AN 45 degree end keeps flow a little smoother.

Completing the hose

Pair with ISR -6AN braided black nylon hose sold per foot and the matching straight or 45 degree ISR -6AN ends. Two ends per hose.

All ISR Performance products are designed for off-road use only.