ISR Performance Front Upper Camber Arms Nissan 350z / Infiniti G35

The ISR Performance front upper camber arms for the Nissan 350Z and Infiniti G35 give the front end a wide camber range without the hassle most competing arms bring. Many front upper arms on the market force you to pull the ball joint to make an adjustment. These are set with a 19mm wrench and nothing has to come apart.

Adjustment made simple

Being able to change front camber in minutes matters if you switch between street and track settings or are chasing tire wear. The ISR arms also use a high quality serviceable ball joint, so a worn joint can be replaced instead of scrapping the arm.

• Adjust with a 19mm wrench, no component removal
• Serviceable ball joint
• Typical range of +0.5 to -5.5 degrees
• Maximum front camber adjustment for the Z33 and V35

Fitment

Nissan 350Z and Infiniti G35. These will not fit the 2007 Infiniti G35 Sedan.

What's in the box

• 2x front upper camber arms

Install notes

Install with the suspension unloaded, then set camber at ride height. A full alignment is recommended afterward, since changing front camber also affects toe.

All ISR Performance products are designed for off-road use only.