ISR Performance Rear Camber Kit for Nissan 350z G35

Lower a 350Z or G35 and the rear camber heads negative fast. The ISR Performance rear camber kit for the Nissan 350Z and Infiniti G35 lets you bring that number back under control, whether the goal is maximum rear grip on track or even tire wear on a daily driver that sits low.

Why rear camber adjustment matters on the Z33

The factory rear suspension on the 350Z and G35 was designed around stock ride height. Drop the car and the camber curve pushes the top of the rear wheels inward with no built-in correction. Left alone, that means:

• Accelerated inner-edge wear on the rear tires
• Less contact patch under straight-line braking and acceleration
• No way to tune rear grip balance against the front

This camber kit adds the adjustment the factory left out, so you can choose a rear camber setting that matches your ride height and use.

Fits

• Nissan 350Z (Z33)
• Infiniti G35 (V35)

Install and alignment

Set the car at its final ride height before adjusting. Match both sides, then confirm the result on an alignment rack and set rear toe afterward, since changing camber shifts toe. For full control over the rear geometry, combine this kit with ISR's rear lower control arms for the same chassis.

All ISR Performance products are designed for off-road use only.