ISR Performance Bottom Mount Turbo Lines - SR20DET S14 Motor

Pulling the turbo on an S14 SR20DET almost always ends the life of the brittle factory hard lines feeding it oil and coolant. The ISR Performance bottom mount turbo line kit for the S14 SR20DET replaces that OEM plumbing with flexible braided lines that are easier to route, easier to seal, and far more durable than the originals.

Built From

• Racing hose with a pre-dyed black Nomex cover for peak performance and a consistent, fade-resistant look.
• Kevlar blended into the fire-retardant Nomex cover for greater abrasion resistance and hose strength.
• Smooth, firm inner tube of black nylon reinforced synthetic rubber with a lightweight outer fibre cloth braid.
• Up to 45 percent lighter than conventional high performance racing hose assemblies.
• Aircraft quality fittings, and new aluminum washers come in the kit.

Application

Nissan S14 SR20DET with a bottom mounted turbo. These are direct replacements for the factory hard lines used on S13, S14 and S15 SR20DET T25/T28 turbos; this specific kit is configured for the S14 bottom mount. Top mount S14 and both S13 variants are sold separately.

In the Bay

Besides sealing properly, the black braided lines clean up the area around the turbo considerably. Install the fresh aluminum washers on both sides of each banjo bolt, confirm the lines are clear of the manifold and downpipe, and check for seepage after the first warm-up.

All ISR Performance products are designed for off-road use only.