ISR Performance Adjustable Rear Suspension Arm Kit - 2017+ Infiniti Q60

Lowering a 2017 and newer Infiniti Q60 on coilovers or air suspension pushes the rear camber and toe outside factory specs, and the stock arms offer no way to bring them back. The ISR Performance adjustable rear suspension arm kit for the Q60 gives you the adjustment range to return the rear alignment to spec at a lowered ride height, so the car handles predictably and stops chewing through the inside edge of its rear tires.

What the kit covers

All three rear adjustment points are included: camber arms to correct negative camber from lowering, toe arms to set rear toe, and traction rods to control the forward and rearward position of the hub. Each arm uses high quality heim joints for precise movement without the deflection of rubber bushings, and the adjustment range is enough to reach factory alignment specs on a lowered car.

Kit contents

• 2x rear camber arms
• 2x rear camber arm rod end spacers
• 2x rear traction rods
• 2x rear spacer sets
• 2x rear toe arms
• 2x rod end spacer sets

Fitment

2017+ Infiniti Q60.

Notes

Set the ride height first, then have the car aligned with the arms adjusted to the target specs. Heim jointed arms transmit more road noise than the factory rubber bushed arms, which is a normal tradeoff for the precision they provide. Check the jam nuts after the first few hundred miles.

All ISR Performance products are designed for off-road use only.