ISR Performance ST Series Exhaust - 2016+ Infiniti Q60 RWD

The ISR Performance ST Series exhaust for the 2016 and newer Infiniti Q60 RWD replaces the mid pipe and factory rear muffler with a true dual, Y pipe back stainless steel system. It starts at a 3 inch two bolt flange, splits into twin 2.5 inch pipes with bottle style resonators, and finishes in a pair of aggressive mufflers wearing 4 inch tips. The result is a deeper tone from the twin turbo VR30 without the drone that unresonated systems can bring.

Why the ST Series works on the Q60

• Stainless steel 3 inch two bolt inlet flange
• Two 2.5 inch pipes with bottle style resonators
• Dual mufflers with 4 inch tips that fill the rear valance properly
• Direct bolt on to the factory Y pipes
• Gaskets, hardware and an exhaust brace are all in the box

Fitment

2016+ Infiniti Q60 RWD. Not for AWD models.

About the flange adapter

The factory Q60 Y pipe outlet is quite small in diameter, so ISR includes a special tapered flange adapter that seals cleanly against the OEM piece. If you are running an aftermarket Y pipe, the adapter is not needed.

Box contents

• 1x resonator section
• 2x muffler sections with 4 inch tips
• 2x two bolt 2.5 inch gaskets
• 2x two bolt 3 inch gaskets
• 8x bolts and 8x nuts
• 1x flange adapter for the factory Y pipe
• 1x exhaust brace

All ISR Performance products are designed for off-road use only.

Legal in California only for racing vehicles which may never be used, or registered or licensed for use, upon a highway.