ISR Performance 5 Lug Hub Conversion Set - Nissan 240sx 89-94 S13

The ISR Performance 5 lug hub conversion set takes a 1989-1994 Nissan 240SX S13 from its factory 4 lug hubs to the standard Nissan 5x114.3 pattern. Unlike conversions that require modified spindles or ball joints, these hubs are a direct replacement: pull the stock hubs, fit the 5 lug hubs and the car is ready for a far wider range of wheels and brakes.

Specifications

• 5x114.3 bolt pattern with M12 x 1.25 wheel studs
• Full front and rear set
• 66mm bore front and rear
• Retains the original S13 knuckles

Front hubs

• Bearing included, lightweight design
• Standard wheel studs pre-installed
• Compatible with slotted rotors and wheel spacers
• 14.35mm knurl

Rear hubs

• Hub bearing inserted
• CNC machined for precision
• Standard hub studs mounted
• Plug and play installation
• 12.85mm knurl

Fitment

Nissan 240SX S13, 1989 to 1994, as a direct replacement for the factory 4 lug hubs. This setup will not work with S14 front knuckles; it is specifically designed around the original S13 knuckles.

Once converted, you will need 5 lug wheels and matching rotors. Torque the axle nuts to spec and recheck wheel torque after the first drive.

All ISR Performance products are designed for off-road use only.

Legal in California only for racing vehicles which may never be used, or registered or licensed for use, upon a highway.