ISR Performance 5 Lug Front Conversion Hub - Nissan 240sx 89-94 **Single Hub**

The ISR Performance 5 lug front conversion hub converts the front of a 1989 to 1994 Nissan 240SX S13 from the factory 4x114.3 pattern to 5 lug, opening up a much wider selection of wheels and the 5 lug brake upgrades that go with them. This listing is for a single front hub; ISR also sells them as a pair of front hubs.

Why convert the S13 to 5 lug

The S13's 4 lug pattern limits wheel choice and rules out most big brake kits from later Nissans. Converting to 5 lug with hubs rather than adapters keeps the wheel mounted directly to the hub with no extra offset and no stacked hardware, which is the approach most drift and track builders prefer.

Hub specifications

• Wheel stud thread: M12 x 1.25
• Stud knurl size: 14.5mm
• Sold as a single front hub, or available as a pair

Application

Nissan 240SX S13, 1989 to 1994, front. Pair with the ISR 5 lug rear conversion hubs for a complete conversion.

Install considerations

A front hub swap means pressing bearings and reinstalling the hub into the knuckle. The 14.5mm knurl lets you fit longer aftermarket studs if you run spacers. Confirm your brake rotor's center bore and bolt pattern match the new 5 lug hub before assembling.

All ISR Performance products are designed for off-road use only.