Ace Up Spec 3 Inch High Flow Catalytic Converter - Nissan 240sx 89-98 S13 S14

$159.95
( 0 Reviews )
Trust Badge

Current stock:

The Ace Up Spec 3 inch high flow catalytic converter was put together for the 1989 to 1998 Nissan 240SX as a way to keep a cat in the exhaust without choking a turbo SR or KA build. It is a 3 inch unit with a honeycomb substrate that flows far better than a stock converter, and it bolts between any 3 inch SR downpipe or aftermarket header and a 3 inch cat-back system.

Highlights

  • 3 inch inlet and outlet
  • High flow honeycomb design that outperforms a stock catalytic converter
  • Bolts to any 3 inch SR downpipe or aftermarket header
  • Connects to any 3 inch cat-back exhaust
  • Built using Magnaflow or Catco brand cats, depending on availability

Fitment

Nissan 240SX 1989 through 1998, S13 and S14 chassis, with a 3 inch downpipe or header and 3 inch cat-back.

Why Run a High Flow Cat

Many states require a catalytic converter, and even where they do not, a cat keeps the car more neighbor friendly than a straight pipe. The issue with the factory converter is restriction: it costs horsepower and torque on a turbo car, and once it starts to clog it needs replacing again. A high flow unit reduces the emissions the car puts out while giving up far less flow than the stock part, so it is the sensible middle ground for a street driven 240SX.

Install Notes

Use fresh 3 inch gaskets at both flanges. If your downpipe is an SR unit with the stock style flange, confirm bolt pattern before ordering. Because brand varies with availability, overall length may differ slightly, so measure your gap and allow for an adjustable hanger or a short section of pipe if needed.

0 Reviews

Be the first to review this product.

Add a Review

Ace Up Spec 3 Inch High Flow Catalytic Converter - Nissan 240sx 89-98 S13 S14