ROFU - Max Street Friction Slotted 30mm 4 & 5 lug Front Rotors - Nissan 300ZX Z32

The ROFU Max Street Friction slotted front rotors are 30mm thick replacements for the Nissan 300ZX Z32, and they are drilled with both the 4 x 114.3 and 5 x 114.3 bolt patterns. That dual drilling is what makes them so useful: they serve as a straight replacement on a Z32, and they also let a Nissan 240SX S13 or S14 run the Z32 front brake upgrade on either stock 4 lug or converted 5 lug hubs.

Slotted, not drilled

These are slotted only. Slots sweep gas and pad dust off the friction surface and give the pad a fresh bite under repeated hard stops, without the crack-prone holes of cross-drilled rotors. For a car that sees track days or spirited canyon driving, slotted is the more durable choice.

Who they are for

• 300ZX Z32 owners replacing worn 30mm front rotors
• 240SX owners who have done, or are planning, the Z32 front brake conversion
• Anyone wanting new rotors to match a set of ROFU Z32 front calipers

Fitment

• Nissan 300ZX Z32 with 30mm front rotors
• Nissan 240SX S13 and S14 with Z32 front calipers, 4 or 5 lug

Sold as a pair

• 1x left slotted 30mm front rotor
• 1x right slotted 30mm front rotor

Install note

Bed the rotors in with a new set of pads using a few moderate stops followed by progressively harder ones, then let them cool fully before hard use. Pair with ROFU Z32 front calipers and MSF pads for an all-new front brake package.