ISR Performance Steel 50mm Open Ended Lug Nuts M12x1.25 - Black

Black lug nuts disappear into a dark wheel and sharpen up a silver one, and the ISR Performance steel 50 mm open ended lug nuts in black are a durable way to get that look on an M12x1.25 car. The set of 20 extended tuner style nuts is made for aftermarket wheels with small lug holes that will not accept a conventional hex nut.

At a glance

• M12x1.25 thread pitch
• 50 mm length
• 17 mm hex drive
• Heat treated steel construction
• Black finish
• Set of 20

Open ended for extended studs

The open top means a stud of any reasonable length can pass through the nut. This is the correct nut style for cars running extended studs, spacers or thick wheel mounting pads, where a closed nut would run out of thread before the wheel was tight.

Material choice

Steel that has been heat treated is far more resistant to thread damage and hex rounding than the soft aluminum used in many budget lug nuts. If you pull wheels often, these will still look and work right after many cycles.

Fitment

Any vehicle with M12x1.25 wheel studs and wheels that accept a 17 mm hex tuner lug. Confirm your thread pitch before ordering.

All ISR Performance products are designed for off-road use only.