ISR Performance Pro Series Coilovers - Nissan 240sx 95-98 8k/6k

Coilovers are usually the first real modification on a Nissan 240SX, and they set the baseline for every suspension part that follows. You can bolt on the best adjustable arms and bushings available, but the car will still only handle as well as its weakest link. The ISR Performance Pro Series coilovers for the 1995 to 1998 S14 240SX hit a balance of build quality, handling and value that makes them a sound foundation for a street car, a track car or a drift build.

Pro Series features

• 32 way adjustable damping
• Mono-tube design
• Spring rates: 8k front, 6k rear
• Front pillowball upper camber mounts
• High end Japanese bearings

ISR released the Pro Series after years of success with the Basic coilovers, the same units that ran on ISR's professional Formula Drift cars. The Pro line brings better damping control and overall performance for drivers who want more precision than the Basics offer.

Fitment

1995 to 1998 Nissan 240SX, S14 chassis. ISR has an install video and review of these coilovers on one of its former shop cars, an S14 that once belonged to Forrest Wang and was an early Formula Drift car.

What's in the box

• 2x front coilover assemblies
• 2x rear coilover assemblies
• 2x rear coilover mount spacers
• 1x spanner wrench set
• 10x top hat lock nuts

Install note

The rear mount spacers are included for the S14 and should be used during installation. Plan on an alignment once ride height is set.

All ISR Performance products are designed for off-road use only.