ISR Performance Driveshaft - VQ Swap S13 Non ABS - Steel

The ISR Performance steel driveshaft for a VQ35DE-swapped Nissan 240SX S13 is a one-piece, dynamically balanced shaft built for the 350Z 6-speed transmission in the S13 chassis. This non-ABS version is sized for the 1989-1994 S13 with the non-ABS differential, so the length and rear flange match without guesswork. Used together with the matching ISR swap mounts, it bolts in with no modification.

Why steel

Steel is the durable, budget-friendly choice for a swap that will see drift or track use. It tolerates the shock loads of clutch kicks and curb strikes well and costs less to replace if it is ever damaged. ISR builds every driveshaft with high quality universal joints and balances each one before it ships.

Application

• Nissan 240SX S13 (1989-1994)
• VQ35DE engine swap with the 350Z 6-speed transmission
• Non-ABS differential
• Designed to pair with ISR VQ swap mounts

Confirm your combination

Driveshaft length depends on three things: the engine, the transmission and whether the car has an ABS or non-ABS differential. Differentials get swapped often on S13s, so check the actual unit under the car. If anything is uncertain, contact us before ordering and we will confirm fitment so you are not stuck with a shaft that is the wrong length.

All ISR Performance products are designed for off-road use only.