ISR Performance Brake Line Kit - Mazda Miata 01-05 (Sport Suspension 4 line kit)
Mazda fitted the 2001 to 2005 Miata Sport suspension package with brake hardware that differs from the standard car, and the ISR Performance brake line kit for the 01-05 Mazda Miata with Sport suspension is built around that difference. It replaces all four factory rubber hoses with braided stainless lines that fit the Sport package correctly.
What you gain
- Firmer, more linear pedal, since the stainless braid stops the hoses from swelling under pressure
- More consistent feel across a hot session, when rubber hoses are at their softest
- Both front and rear covered, so there is no mix of rubber and stainless on the car
Supplied in the box
- Front brake lines (2)
- Rear brake lines (2)
- Front banjo bolts (2)
- Rear banjo bolts (2)
- Crush washers (8)
- Installation instructions
The kit includes the OEM replacement adapters and banjo bolts the installation requires.
Compatible vehicles
Mazda Miata NB, 2001 to 2005, Sport suspension package only. Standard suspension Miatas from 1989 to 2005 should use the ISR standard suspension kit.
Installation guidance
Brake line installation should be done by a professional mechanic. Read the included instructions completely. In brief: raise the car, remove the wheels, drain the fluid, and note C-clip and banjo positions as the old lines come off. Clean all sealing surfaces, fit the new lines from the caliper along the OEM path with the supplied crush washers, seat every tab and bracket so there is no tension at either end, and confirm the hoses are not kinked, twisted, stretched or trapped through full steering and suspension travel before final tightening. Hold hard lines with the correct wrench, torque to the manufacturer's spec (or 12 to 14 ft-lbs), then bleed with fresh DOT fluid per the manufacturer's procedure.
Warning: check every connection for leaks and confirm a firm pedal before test driving, and recheck all lines after the first 100 miles. Do not mix rubber hoses and stainless steel lines on the same system, and never force, rotate or stretch a stainless hose assembly; it may cause failure.
All ISR Performance products are designed for off-road use only.
0 Reviews
Be the first to review this product.
Add a Review