ISR Performance

ISR Performance Silicone Radiator Hose Kit - Scion FR-S / Subaru BRZ - Red

$88.82
( 1 Review )

Available on backorder. Ships from ISR Performance in 2-4 weeks

Trust Badge

Current stock: 0

Red is a natural fit under the hood of an FR-S or BRZ, and the ISR Performance red silicone radiator hose kit for the Scion FR-S and Subaru BRZ pairs that look with hoses that outlast the factory rubber. ISR's silicone-based coolant hoses are designed for a wider range of heat and coolant pressure than OEM-style hoses.

What silicone changes

With much higher strength than the OEM rubber, silicone hoses do not balloon when the cooling system is hot and pressurized, and they do not go brittle with age. That makes them a worthwhile upgrade on any FA20 car, and especially on one that has been supercharged or turbocharged, where cooling system margin is tighter.

Application

  • Scion FR-S
  • Subaru BRZ
  • Color: red (blue also offered)

Fitting the hoses

Use fresh clamps, refill with new coolant and bleed thoroughly, with the heater on so the core clears of air. Combine with the ISR FR-S / BRZ aluminum radiator for a complete cooling system refresh. Once the engine has been through a few heat cycles, check the clamps again and top up the coolant if the level has settled.

All ISR Performance products are designed for off-road use only.

1 Review

5/5
Jeff Nov 21st 2019

Tight fit, but looks great.

The hose was a bit difficult to get on the OEM plastic outlets. I used a heat gun to soften up the silicone, perhaps I could have used a lubricant. But once installed it looks and functions great. Do not plan for a 15 minute swap. This took some patience and 2 hours to get installed. I used hose clamps from Home Depot.

Add a Review

ISR Performance Silicone Radiator Hose Kit - Scion FR-S / Subaru BRZ - Red