0 Reviews
Be the first to review this product.
Add a Review
ISR Performance Rear Sway Bar End Links - Scion FR-S / Subaru BRZ 13-20
Once a Scion FR-S, Subaru BRZ or Toyota 86 is lowered, the fixed length factory rear end links put the sway bar at an angle it was never designed to sit at, preloading one side and leaving the bar doing uneven work in corners. The ISR Performance rear sway bar end links replace those flimsy stock links with adjustable rod end links, so you can set the length to match your ride height and bring the rear bar back to neutral.
A sway bar only works evenly when both end links hold it level with the car sitting at rest on its wheels. Set the links with the car on the ground and the suspension settled, adjusting each side until the bar is unloaded, then lock them down. This is especially important if you have upgraded to a stiffer rear bar, where any preload is magnified and shows up as inconsistent handling from left to right turns. Rod ends also remove the slop that worn factory links introduce, so the bar responds the moment the chassis begins to roll.
All ISR Performance products are designed for off-road use only.
Create an account with us and you'll be able to:
Fill in your email below to request a new password. An email will be sent to the address below containing a link to verify your email address.